|
|
|
|
|
|
Stanley 84-104 Diagonal Cutting Plier, 5-3/4 in OAL, 1/3 in Cutting Capacity, Black Handle, Double Dipped Handle
|
|
|
Made of forged steel with hardened cutting edges for durability and a rust-resistant finish. Double dipped handle for comfort. Meets or exceeds ANSI standards.
|
|
|
|
|
|
|
|
|
|
Stanley 84-027 Diagonal Cutting Plier, 6 in OAL, Ergonomic Handle, 53/64 in W Jaw, 15/16 in L Jaw
|
|
|
The 6 in diagonal pliers are comfortable and durable. Its bi-material handle helps you grip the tool more comfortably. With a fixed joint design, induction hardened jaws for a tool that stays sharp and a body made of drop-forged steel, this tool is indispensable for your tool box, work bench or tool belt.
|
|
|
|
|
|
|
|
|
|
Stanley 84-105 Diagonal Cutting Plier, 6-3/16 in OAL, 25 mm Cutting Capacity, Black Handle, Double Dipped Handle
|
|
|
Made of forged steel with hardened cutting edges for durability and a rust-resistant finish. Double dipped handle for comfort. Meets or exceeds ANSI standards.
|
|
|
|
|
|
|
|
|
|
Stanley 84-108 Diagonal Cutting Plier, 7-5/16 in OAL, 7/8 in Cutting Capacity, Black Handle, Double Dipped Handle
|
|
|
Made of forged steel with hardened cutting edges for durability and a rust-resistant finish. Double dipped handle for comfort. Meets or exceeds ANSI standards.
|
|
|
|
|
|
|
|
|
|
Irwin 2078306 Diagonal Cutting Plier, 6 in OAL, 13/16 in Jaw Opening, Blue/Yellow Handle, Cushion-Grip Handle
|
|
|
Made of durable nickel chromium steel with induction hardened cutting edge stays sharper, longer. ProTouch grips provide extra comfort and reduces hand fatigue. Meets or exceeds ANSI specifications.
|
|
|
|
|
|
|
|
|
|
STANLEY 89-858 Diagonal Cutting Plier, 6 in OAL, 13/16 in Cutting Capacity, Black Handle, Slip-Resistant Handle
|
|
|
Made of drop forged steel with 33% larger cutting edge that requires 45% less cutting effort. Cuts wire and other thin materials. Comfortable bi-material grip.
|
|
|
|
|
|
|
|
|
|
Crescent Pro Series PS5429C Cutting Plier, 8 in OAL, 11 AWG Cutting Capacity, Blue/Gray Handle, Ergonomic Handle
|
|
|
Made of chrome vanadium steel for increased durability, heat-treated joint rivet for smooth and consistent operation and induction hardened edges for long cutting life. Standard edge with 11 AWG cut capacity. Compound leverage design that increases cutting power by 50% and is 1/3 lighter than standard pliers, reduces fatigue. Co-molded grips for added comfort.
|
|
|
|
|
|
|
|
|
|
Irwin 2078308 Diagonal Cutting Plier, 8 in OAL, 1-1/8 in Jaw Opening, Blue/Yellow Handle, Cushion-Grip Handle
|
|
|
Made of nickel chromium steel with right angle teeth grip in all directions for maximum bit. ProTouch grips provide extra comfort and reduces hand fatigue. Meets or exceeds ANSI specifications.
|
|
|
|
|
|
|
|
|
|
DeWALT DWHT70275 Diagonal Cutting Plier, 9.7 in OAL
|
|
|
The compound action diagonal pliers include induction hardened cutting blades giving these pliers 70% more cutting power over standard cutting pliers. The bi-material handle allows for a strong grip and provides added comfort.
|
|
|
|
|
|
|
|
|
|
CHANNELLOCK 337 Diagonal Cutting Plier, 7 in OAL, Blue Handle, Ergonomic Handle, 0.81 in W Jaw, 0.79 in L Jaw
|
|
|
Not all cutting edges are the same. Only CHANNELLOCK? uses precision machined knife and anvil style cutting edges to ensure ideal mating and great cutting edge life. The CHANNELLOCK? knife and anvil cutters ensure proper cutting edge alignment, resulting in a clean cut every time. Most manufacturers use two sharp edges which can become misaligned, losing their cutting effectiveness. Experience the difference for yourself.
|
|
|
|
