|
|
|
|
|
|
CAMCO 10862 Bilingual Run-Off Tube, Thermoplastic Polypropylene
|
|
|
The CAMCO side mount run-off tube carries water steams safely to the drain pan or drain, if T and P valve activates. Thermoplastic polypropylene run-off tubes present a rigid surface for gripping with standard wrenches and can be cut to length.
|
|
|
|
|
|
|
|
|
|
CAMCO 09973 Water Heater Element Tool, For: Electric Water Heater Elements
|
|
|
The CAMCO water heater element quick change tool helps you save time and water when changing your water heater element. Instead of emptying your entire water heater tank just to change the element, simply turn off the water at the water heater to create a vacuum. Securely attach the tool and place a bucket handle in the built-in groove to catch any excess water. Quickly change the element and remove the tool when you're done.
|
|
|
|
|
|
|
|
|
|
CAMCO 11260 Recyclable Drain Pan, Plastic, For: Electric Water Heaters
|
|
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
|
|
|
|
|
|
|
|
|
CAMCO 11460 Recyclable Drain Pan, Plastic, For: Electric Water Heaters
|
|
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
|
|
|
|
|
|
|
|
|
CAMCO 10023 Continuity Tester
|
|
|
Test your elements and thermostats while still in the water heater. 1 piece.
|
|
|
|
|
|
|
|
|
|
CAMCO 09953 Bilingual Element Socket, For: 1/2 in Socket Drive
|
|
|
Fits standard 1/2 in socket drive to replace screw-in water heater elements.
|
|
|
|
|
|
|
|
|
|
CAMCO 20800 Recyclable Drain Pan, Aluminum, For: Gas or Electric Water Heaters
|
|
|
For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
|
|
|
|
|
|
|
|
|
Frost King SP57/11C Insulation Blanket, 3 in Thick, Plastic, For: 60 gal Gas, Oil and Electric Water Heater
|
|
|
3 in x 48 in x 75 in vinyl faced fiberglass water heater insulation blanket, R value 10.0, fits up to 60 gal tank, plastic tape. For gas, oil or electric water heaters.
|
|
|
|
|
|
|
|
|
|
Plumb Pak PP888-12LF Water Heater Connector, 3/4 in, FIP x MIP, Stainless Steel, 24 in L
|
|
|
Plumb Pak Water Heater Connector, Nominal Size: 3/4 in, FIP x MIP Connection, Stainless Steel, 24 in L, Suitable for: Water Heaters
|
|
|
|
|
|
|
|
|
|
CAMCO 11231 Water Heater Stand Kit, Steel, For: 50 gal Residential Water Heaters
|
|
|
Places gas water heaters 18 in above floor as required by the National Fuel Gas and Plumbing Codes. Galvanized sheet metal of 18 ga thick holds up to 50 gal water heaters. Many local building codes require a water heater stand for gas water heaters located in areas where the accumulation of combustible fumes may occur.
|
|
|
|
