|
|
|
|
|
|
Imperial BM0045 Connector Union, 24 ga Thick Wall
|
|
|
Used to connect two non-crimped ends of pipe together. Crimped on both ends.
|
|
|
|
|
|
|
|
|
|
Imperial BM0150 Round End Cap, 5 in Dia, Black
|
|
|
Used to close off non-crimped end of flue pipe or tee.
|
|
|
|
|
|
|
|
|
|
Imperial BM0059 Increaser, 5 to 6 in, Black, Matte
|
|
|
Imperial Increaser, 5 to 6 in, Matte, Black, 24 ga Thick
|
|
|
|
|
|
|
|
|
|
Imperial BM0082 Assembled Tee, 5 in, 24 ga Thick Wall, Steel, Black, Matte
|
|
|
Used with rear outlet stoves. Used to direct exhaust upward.
|
|
|
|
|
|
|
|
|
|
Imperial BM0024 Stove Pipe Elbow, 90 deg Angle, 7 in, 24 ga Gauge, Steel, Black, Matte
|
|
|
Used to connect two lengths of flue pipe together.
|
|
|
|
|
|
|
|
|
|
Imperial BM0035 Adjustable Connector Drawband, 24 ga Thick Wall
|
|
|
Used to connect stove pipe to appliances with flue collars that are slightly larger than the stove pipe opening. 24 ga.
|
|
|
|
|
|
|
|
|
|
Selkirk DSP6P12-1/266012 Stove Pipe, 6 in ID x 6-1/2 in OD Dia, 12 in L, Aluminized Steel/Stainless Steel, Black
|
|
|
Double wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy-gauge stainless steel inner liner. 1/4 in air space between inner and outer pipes provides great insulating value. 6 in clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8 in per joint. Listed to ULC S641 and UL 103 standards.
|
|
|
|
|
|
|
|
|
|
Selkirk DSP8P12-1 Stove Pipe, 8 in ID x 8-1/2 in OD Dia, 12 in L, Aluminized Steel/Stainless Steel, Black
|
|
|
Double wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy-gauge stainless steel inner liner. 1/4 in air space between inner and outer pipes provides great insulating value. 6 in clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8 in per joint. Listed to ULC S641 and UL 103 standards.
|
|
|
|
|
|
|
|
|
|
Selkirk DSP6P24-1/266024 Stove Pipe, 6 in ID x 6-1/2 in OD Dia, 24 in L, Aluminized Steel/Stainless Steel, Black
|
|
|
Double wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy-gauge stainless steel inner liner. 1/4 in air space between inner and outer pipes provides great insulating value. 6 in clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8 in per joint. Listed to ULC S641 and UL 103 standards.
|
|
|
|
|
|
|
|
|
|
Imperial BM0124 Stove Pipe, 7 in Dia, Steel, Black
|
|
|
Commonly used as a vertical section of pipe from the top of a wood stove. Allows a solid one-piece pipe to extend from the appliance up to the ceiling so that there are no joints. One pipe is smaller in circumference than the other is so that the smaller pipe fits inside the larger pipe. Pulling the smaller pipe up adjusts the length from 28 in to 50 in. Eliminates need to cut pipe. 24 ga.
|
|
|
|
