|
|
|
|
|
|
Lenox Speed Slot LXAH31116 Hole Saw, 11/16 in Dia, Carbide Cutting Edge
|
|
|
Lenox Speed Slot Hole Saw, 1800 rpm Aluminum, 690 rpm Stainless Steel, 270 rpm Fiber Glass, 550 rpm Ceramic Tile, 240 rpm Iron Speed, 11/16 in Diameter, Carbide Cutting Edge, Applicable Materials: Abrasives, Cast Iron, Stainless Steel, Steel, Wood, Suitable for: Snap-Back 5L Arbor Models
|
|
|
|
|
|
|
|
|
|
SAW HOLE W/CARB TEETH 1-3/8IN
|
|
|
|
|
|
|
|
|
|
|
|
|
SAW HOLE W/CARB TEETH 2-1/8IN
|
|
|
|
|
|
|
|
|
|
|
|
|
DeWALT ELITE Series DAH4138 Hole Saw, 1-3/8 in Dia, 2-7/16 in D Cutting, 5/8 in Arbor, Carbide Cutting Edge
|
|
|
The DeWALT Elite Series??? multi-material hole saws feature large carbide tips to resist wearing down when hitting nails or abrasive material. The carbide tipped design cuts through abrasive materials including wood with nails, concrete block and fiber cement. An aggressive tooth design cuts through wood with nails quickly for high volume drilling. The deep saw design allows for drilling two by dimensional lumber with 3/4 in plywood in one pass.
|
|
|
|
|
|
|
|
|
|
DeWALT ELITE Series DAH4134 Hole Saw, 1-3/4 in Dia, 2-7/16 in D Cutting, 5/8 in Arbor, Carbide Cutting Edge
|
|
|
The DeWALT Elite Series??? multi-material hole saws feature large carbide tips to resist wearing down when hitting nails or abrasive material. The carbide tipped design cuts through abrasive materials including wood with nails, concrete block and fiber cement. An aggressive tooth design cuts through wood with nails quickly for high volume drilling. The deep saw design allows for drilling two by dimensional lumber with 3/4 in plywood in one pass.
|
|
|
|
|
|
|
|
|
|
SAW HOLE W/CARB TEETH 2-9/16IN
|
|
|
|
|
|
|
|
|
|
|
|
|
DeWALT ELITE Series DAH4218 Hole Saw, 2-1/8 in Dia, 2-7/16 in D Cutting, 5/8 in Arbor, Carbide Cutting Edge
|
|
|
The DeWALT Elite Series??? multi-material hole saws feature large carbide tips to resist wearing down when hitting nails or abrasive material. The carbide tipped design cuts through abrasive materials including wood with nails, concrete block and fiber cement. An aggressive tooth design cuts through wood with nails quickly for high volume drilling. The deep saw design allows for drilling two by dimensional lumber with 3/4 in plywood in one pass.
|
|
|
|
|
|
|
|
|
|
DeWALT ELITE Series DAH4214 Hole Saw, 2-1/4 in Dia, 2-7/16 in D Cutting, 5/8 in Arbor, Carbide Cutting Edge
|
|
|
The DeWALT Elite Series??? multi-material hole saws feature large carbide tips to resist wearing down when hitting nails or abrasive material. The carbide tipped design cuts through abrasive materials including wood with nails, concrete block and fiber cement. An aggressive tooth design cuts through wood with nails quickly for high volume drilling. The deep saw design allows for drilling two by dimensional lumber with 3/4 in plywood in one pass.
|
|
|
|
|
|
|
|
|
|
DeWALT ELITE Series DAH42916 Hole Saw, 2-9/16 in Dia, 2-7/16 in D Cutting, 5/8 in Arbor, Carbide Cutting Edge
|
|
|
The DeWALT Elite Series??? multi-material hole saws feature large carbide tips to resist wearing down when hitting nails or abrasive material. The carbide tipped design cuts through abrasive materials including wood with nails, concrete block and fiber cement. An aggressive tooth design cuts through wood with nails quickly for high volume drilling. The deep saw design allows for drilling two by dimensional lumber with 3/4 in plywood in one pass.
|
|
|
|
|
|
|
|
|
|
SAW HOLE W/CARB TEETH 3IN
|
|
|
|
|
|
|
